Target folder: C:\Users\PETERE~1\DOCUME~1\FC_PRO~1\p1508
Source name:   C:\Users\Peter Erasmus\Documents\FC_Projects\p1508\AC Module V1.fcfx
Title:         
Description:   
Device:        PIC.16F.16F1508
Generated by:  Flowcode v7.3.0.5
Date:          Wednesday, January 03, 2018 14:37:03
Users:         1
Registered to: p.erasmus
Licence key:   F5R0JX
   NOT FOR COMMERCIAL USE
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files\Flowcode 7\compilers\pic\bin\xc8.exe  --chip=16F1508 "AC Module V1.c" --MSGDISABLE=359,1273,1388
Microchip MPLAB XC8 C Compiler (Free Mode) V1.41
Build date: Jan 24 2017
Part Support Version: 1.41
Copyright (C) 2017 Microchip Technology Inc.
License type: Node Configuration

.

AC Module V1.c: 209: (1257) local variable "_FCR_RETVAL" is used but never given a value (warning)

Memory Summary:
    Program space        used    C4h (   196) of  1000h words   (  4.8%)
    Data space           used    29h (    41) of   100h bytes   ( 16.0%)
    EEPROM space         None available
    Data stack space     used     0h (     0) of    D5h bytes   (  0.0%)
    Configuration bits   used     2h (     2) of     2h words   (100.0%)
    ID Location space    used     0h (     0) of     4h bytes   (  0.0%)


You have compiled in FREE mode.
Using Omniscient Code Generation that is available in PRO mode,
you could have produced up to 60% smaller and 400% faster code.
See http://www.microchip.com/MPLABXCcompilers for more information.


Launching the linker/assembler...
C:\Program Files\Flowcode 7\tools\DoNothing\DoNothing.exe  

Launching the programmer...
C:\Program Files\Microchip\MPLABX\v4.05\mplab_ipe\ipecmd.exe  /P16F1508 /F"C:\Users\PETERE~1\DOCUME~1\FC_PRO~1\p1508\AC Module V1.hex" /TPPK3 /M /OL
. . . . .

*****************************************************
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.51.06
Firmware type..............Enhanced Midrange
. . .

Target voltage detected
Target device PIC16F1508 found.
Device ID Revision = 0
. . . .

Device Erased...
Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0xdf
configuration memory
Programming/Verify complete
PICKIT3 Program Report
03-Jan-2018, 14:37:24
Device Type:PIC16F1508
Program Succeeded.
Operation Succeeded
. . . . .


FINISHED
